Single intramuscular injection of one dose (1 ml), irrespective of body weight.
For reconstitution, transfer the entire content of the solvent vial to the vial containing the lyophilisate and reconstitute the lyophilisate as follows: 10 doses in 10 ml, 50 doses in 50 ml, 100 doses in 100 ml and 250 doses in 250 ml of the solvent.
Ensure that the lyophilisate is completely reconstituted before use. Visual appearance after reconstitution: clear, colourless suspension. Avoid introduction of contamination during use. Use sterile equipment. Avoid multiple broaching, for example by using automatic injectors.
ADVICE ON CORRECT ADMINISTRATION
When mixed with Ingelvac CircoFLEX:
• Vaccinate only pigs as from 17 days of age.
• Cannot be administered in pregnant or lactating pigs.
When mixed with Ingelvac CircoFLEX the following equipment should be used:
• Use the same volumes of Ingelvac CircoFLEX and Ingelvac PRRSFLEX EU. • Ingelvac CircoFLEX hereby replaces the solvent of PRRSFLEX EU. • Use a pre-sterilised transfer needle. Pre-sterilised transfer needles (CE certified) are commonly available via medical equipment suppliers.
To ensure correct mixing follow the steps as described below:
1. Connect one end of the transfer needle to the vaccine bottle of Ingelvac CircoFLEX.
2. Connect the opposite end of the transfer needle to the vaccine bottle of Ingelvac PRRSFLEX EU.
3. Transfer the Ingelvac CircoFLEX vaccine into the vaccine bottle of Ingelvac PRRSFLEX EU. If needed, gently press the vaccine bottle of Ingelvac CircoFLEX to facilitate the transfer. After the transfer of the full content of Ingelvac CircoFLEX, disconnect and discard transfer needle and empty vaccine bottle of Ingelvac CircoFLEX.
4. To ensure appropriate mixing of the vaccines, gently shake the vaccine bottle of Ingelvac PRRSFLEX until the cake is fully dissolved.
5. Administer one single injection dose (1 ml) of the mixture intramuscularly per pig, irrespective of body weight. For administration, vaccine devices should be used in accordance with the device instructions provided by the manufacturer. Use the entire vaccine mixture within 4 hours after mixing. Any unused mixture or waste material should be disposed according to local requirements.